Noise Negation: Crafting Clear Audio Artifacts

The most frequent request you’ll get from video makers is to eliminate irritating noises like rumbling or humming from an original clip. Almost all of the time, capturing high-quality audio during filming is challenging since the conversation is often hard to hear or is made unclear due to surrounding noises, such as the dreadful air conditioners or fans.

To get rid of all these awful noises, this Audacity Noise Reduction feature will serve you a significant purpose in removing unwanted background noise for your future videos. Without further ado, let’s get started!

In this article

01 Things You Need to Prepare for Background Noise Reduction

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

02 How to Remove Background Noise in Audacity?

03 Why is Audacity Noise Reduction Not Working?

04 How to Prevent Background Noise in Audio Recording?

05 How to Remove Background Noise in Filmora?

Part 1: Things You Need to Prepare for Background Noise Reduction

Here are few things that you need to consider before you apply the noise reduction to your clips:

1. Noise Sample

A decent sample of the noise you wish to eliminate is perhaps the most crucial aspect of the Audacity remove noise procedure.

This will be used by Audacity to understand the noise and build a noise profile. The noise recording should last for a fair amount of time and be devoid of any other noises.

2. Avoid Copy Pasting Tiny Noise Section in Your Spoken Phrases

When you have a tiny part of noise between your stated words on your audio, please don’t copy/paste it to make a more significant piece of sound for Audacity to examine.

You would not be supplying Audacity with any more information that will help it generate a decent noise profile. The noise profile is what enables Audacity to tell the difference between speech and noise.

3. Minimum 2048 Data Samples Required

To build a noise profile, the Noise Reduction function requires a minimum of 2048 sample data. An audio file with a sampling frequency of 44.1kHz is roughly five hundredths of a second.

Note that this is the minor sound level that Audacity needs to generate a noise profile; however, should you supply a larger sample of the noise, Audacity can typically perform a great job of producing a suitable noise profile. As a result, attempt to capture a few seconds of background noises wherever possible.

4. Establish Recording Level and Record “Silence”

Setting your audio volume and capturing some “quiet” prior to speaking is the best way to achieve this. Instead, when you’ve finished talking, keep your camera/recorder going for a few moments.

Don’t move or create any sounds while capturing the background noises, and keep an ear open for any other noises. You only need to capture the ambient noise for a few moments; two to five seconds will suffice.

Part 2: How to Remove Background Noise in Audacity on Windows and Mac?

Whether you are using Windows or macOS, we will show you a step-by-step process to achieve your results using both software in this part of Audacity remove background music guide.

Remove background noise in Audacity on Windows

Step 1: On your recording, select a few moments of sound. Any segment of noise that incorporates other noises should be avoided.

Step 2: From the Effect menu, select Noise Reduction.

Step 3: Select the Get Noise Profile option whenever the Noise Reduction effect screen appears.

Note: Choose whether to implement the noise removal to the entire waveforms or only a portion of it.

Step 4: To access the Noise Reduction effects window, go to Effects > Noise Reduction. Raise the level of noise reduction progressively while previewing the result.

Step 5: Head over to the File section to Export and Save the result. Audacity does not save sound clips when you select Save Project; instead, you must choose Export. Select the file type you want to store and the place wherever you can save it. Select Save after giving the File Name.

Remove background noise in Audacity on Mac

Step 1: Create a room tone-containing audio file. When you don’t have a separate track for room tone, use a recording with a few moments of quiet in it. Click-and-drag to select a segment with a few minutes of silence using the Selection Tool.

Step 2: Select Noise Reduction from the Effects tab. Select the Get Noise Profile tab in the new tab under Step 1. The screen will shut, and Audacity will take noise profile samples of the indicated area.

Step 3: Click-and-drag to select the whole file, which requires noise reduction with the Selection Tool. To re-open the function, go to the Effect tab and pick Noise Reduction. Make modifications to the following parameters under Step 2:

• Reduce and Residue
• Frequency Smoothing (bands)
• Sensitivity
• Noise Reduction

Step 4: To listen to how the chosen file will look with the selected parameters, select Preview. Re-adjust until you have a sound noise reduction with no interference. When you’re finished, select Reduce and click OK.

Part 3: Why is Audacity Noise Reduction Not Working?

It’s possible that the Noise Reduction function isn’t letting you mop up your recording since your audio isn’t appropriate for it. The disturbance must be continuous, not random or fluctuating, to work for Audacity’s Noise Reduction function.

For example, the Noise Reduction function will not assist if your audio was made in a busy environment with unique noises such as background chatter, random traffic noises, or in an exhibition space or museum. The Noise Reduction feature in Audacity isn’t meant to cope with that kind of distortion. You’ll need to alter your recording approach if you’re capturing voice in either of those situations.

Under the following situations, the Audacity Noise Reduction function might underperform.

• Particular noise in the background, including traffic or people.
• When the harmonics of the sound and voice are comparable.
• There is sound variance where there is fluctuation in the noise.
• The volume of the voice is comparable to or lower than that of the background noise.
• When the noise is irregular or changeable rather than continuous.
• The loudness is deafening.
• The sound is a single click or pop.

Part 4: How to Prevent Background Noise in Audio Recording?

Although Audacity allows eliminating noise very simply, it is still an additional level that takes time to refine your podcast production. These pointers can help you avoid the necessity for noise reduction and cut down on the amount of time you spend processing.

1. Reduce the Computer Fan Noise

Whenever computers become too heated, they can produce a lot of noise. You may limit the amount of software that runs and position your mic away from the keyboard to help lessen this impact and avoid the fan from coming on.

However, even if you observe all of these guidelines, undesired recording sounds may still appear in your program. Fortunately, contemporary software makes this problem quite simple to resolve.

2. Reduce the Gain and Get Close to the Mic

Reduce the gain (sensitivity of the microphone) and go nearer to it. Talking straight into the microphone won’t distort your audio if you reduce the gain, and that would assist your microphone in concentrating on scooping up your voice’s tone.

Bonus Tip: Set your recorder’s (or DAW’s) sensitivity such that your speech peaks between -12 and -10db.

3. Utilize a Versatile Microphone

Condenser and dynamic microphones are the two most common types of podcast microphones. Condenser microphones are significantly more sensitive instruments meant to take up average atmospheric noise, whereas dynamic microphones have a narrower frequency range, picking up fewer ambient noises.

4. Optimize Your Recording Environment

The most significant and most crucial aspect of your podcasts’ sound quality is where you capture it. To optimize your personal podcasting space, we recommend choosing a peaceful, compact area away from HVAC systems, vehicles, external hard drives, background sound, motors, and other distractions. You may also increase the tone of your room by using natural sound absorbents such as curtains, rugs, carpets, and sofas.

Part 5: How to Remove Background Noise in Filmora?

Although there is a lot of software available to eliminate ambient noise, we highly suggest Wondershare Filmora Video Editor to edit audio and video in one place.

In addition to the standard audio editing capabilities, the recently redesigned Filmora currently includes enhanced waveforms, volume Keyframing , peak metering, and audio transitions, giving you a better audio editing interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Filmora Video Editor will quickly remove ambient sound from both sound/video. You may also remove the sound from the video with this simple video editor, use the Audio Equalizer or Audio Mixer functions to modify the audio further, and then Export and save the audio in an Mp3 file. Here are the detailed steps:

Step 1: In the Wondershare Filmora Timeline menu, Import your footage. Trim the footage after previewing it and deleting the sections you don’t want to retain.

Step 2: To eliminate the ambient noise immediately, double-click on the video file, and go to the Audio panel to select the Remove Background Noise option. You will find that the background noise is removed automatically.

Step 3: After checking the results, select Export to download the noise-reduced clip to your desktop or upload it immediately to YouTube or Vimeo.

Conclusion

Well, there you have it. In this Audacity Remove Background Noise guide, we have reviewed every possible method you can adopt to get rid of the unnecessary background noise in the Audacity. And if the desired results are still not achieved, we highly recommend using the Wondershare Filmora editing software. Not only will it help you remove the unwanted ambient noise, but it will also allow you to customize your audio or video file further.

The Ultimate Guide to Incorporating Apple’s Siri Into TikTok

Edit TikTok Videos with Filmora

Wondershare Filmora is one of the best video editors to level up your TikTok video with stunning effects. Download and have a try.

Try It Free Try It Free

TikTok has had numerous trends, and out of all, one trend that is gaining a lot of popularity is the text-to-speech audio effect. For iPhone users, Siri is not new. Siri helps them read text messages and much more, but soon after the text-to-speech feature was added in TikTok, it took the TikTokers world by storm. But since the voice sounded so much like Siri, people started calling it Siri voice rather than text-to-speech. This feature allows users to convert any text into a speech using an automated voice. And if you have never used the text-to-speech feature, this post will help you understand how to do the Siri voice on TikTok.

In this article

01 What is Siri Voice?

02 How to Do Siri Voice on TikTok?

03 TikTok Voice Changer Apps

Part 1: What is Siri Voice?

Siri voice in TikTok is basically an automated voice feature where the voice reads out the text on the video. The feature is called text-to-speech. So, whenever you enable it on your video, the text will be read out loud, which makes the video watching experience fun. Therefore, those who want to add a voice to their TikTok videos can use the text-to-speech feature and let the automated voice do that talking.

You will find almost everyone using it, even those who often use their voice in TikTok videos, and that’s because many TikTok users find it entertaining and funny. Well, no matter why you want to use this feature, find out how to do Siri voice on TikTok without any hassle in the next part!

Part 2: How to Do Siri Voice on TikTok?

To do Siri voice on TikTok, you will have to follow just a few simple steps. Here are the steps that you need to take care of:

Step 1: Launch TikTok on your mobile phone.

Step 2: Start recording a video; else, upload an already recorded video.

Step 3: Tap the Upload button and then click on the checkmark.

Step 4: Now, begin writing something on the screen.

Step 5: Tap on the text you have just written, and you will see the Text-to-Speech option.

Step 6: Click on that and hear the automated voice reading your text. Now, upload the videos, and that’s it. All done!

Part 3: Don’t Like the Siri Voice on TikTok? Try These TikTok Voice Changer Apps

If you are not impressed with the Siri voice on TikTok and would instead like to use some other fun and peppy voice for the text, the good news is there are tons of apps that can help you do that. But before we share the names of the apps, let’s throw some light on why people are looking for such apps. First, if you are using TikTok’s text-to-speech feature in North America, you will hear a computer-automated female voice who will read out the text of the video.

But, when it comes to the UK, the app uses a computer-generated male voice with a rockin’ accent instead of a female voice. However, recently the voiceover artist of the female voice has filed a lawsuit against the company, saying that she never permitted TikTok to use her voice for text-to-speech, which is why TikTok is now using a cheerful valley girl voice for the text-to-speech feature. Unfortunately, TikTok users are not happy with the new voice, making them look for the best TikTok voice generator apps.

If you also want to add another voice for the text-to-speech, here are our hand-picked top and best 5 TikTok voice generator apps for iOS and Android.

1. Voice Changer

Price: Free

Supported OS: Android

Rating: 4.4

Voice Changer is an easy-to-use application and is available for Android users. It lets you change your voice on the go, and the best part is, it offers 40+ voice effects. For example, you can change your voice to helium, robot, zombie, monster, giant, and more! All you need to do is record your voice and start applying the filter; once you are happy with the voice effect, save the recording and share it on TikTok and other social media platforms. The voice filters are unique, and the sharing options are excellent too. The drawback, though, it displays tons of ads, which can be pretty annoying.

2. Celebrity Voice Changer Parody

Price: Free/in-app purchase

OS: iOS

Rating: 4.2

If you want to surprise everyone through your TikTok videos, how about changing the voice to a celebrity’s voice? Well, Celebrity Voice Changer Parody lets you do just that. It has more than 100 celebrity voices, and over 25 million people use the app. It’s the first-ever celebrity voice changer, and it changes the voice using AI technology. The voice modification process is fast and easy, and the plethora of choices you have will leave you impressed. The only drawback is that the free version comes with limited voice effects.

3. Video Voice Changer – Fun Editor

Price: Free/in-app purchase

OS: iOS

Rating: 4.4

If you are looking for an app that will let you change the voice of a pre-recorded video, you may like Video Voice Changer – Fun Editor. With this app, you can change the voice of any video and make it sound like a ghost, bear, mice, and more. The voice effects are entertaining. Moreover, Video Voice Changer – Fun Editor offers you 30+ voice effects. All you need to do is pick a voice effect that you want to use and get going. The app has multiple video recording tools, excellent dubbing features, and rich voice effects. But if you want to unlock all the app’s features, you will have to make in-app purchases.

4. Voice Changer - Audio Effects

Price: Free/in-app purchases

OS: Android

Rating: 4.4

Voice Changer - Audio Effects is an Android app and is available for free. It lets you record your voice in HD quality and later change it to different voices. The interface is easy to understand, and once you add the voice effect, you are ready to share your exciting video with voice with the world. Along with providing you with multiple voice effects, it lets you customize them as well so that you can choose the best sound effect that complements the video. Another feature that you may like is the speed changer effect, making the voice sound hilarious. Along with changing the voice, you can use it to create new ringtones as well. Although it’s free to use, the only drawback is that it contains a lot of ads.

5. VoiceFX - Voice Changer with voice effects

Price: In-app purchase

OS: Android

Rating: 4.3

The last one that you can go for is VoiceFX - Voice Changer with voice effects. This app is available for Android users, and it lets you change your recorded voice to different sounds. Not just your voice, you can even add audio effects to music files as well. Some of the popular audio effects you can try are chipmunk, robot, autotune, mask, drunk, female, sheep, alien, and much more. Using VoiceFX - Voice Changer with voice effects is easy. You can choose an audio effect and record your voice, store the audio as an MP3 file, use this app to change a live playback, and much more. Just one app, but it has many features. Some of the voice effects will come for free, but you will have to make in-app purchases for the top voice effects.

Now you know how to get the Siri voice on TikTok, and if you don’t want to use the built-in voice of the TikTok app, you can always go for TikTok voice generator apps, which will offer multiple voices to choose from. So, change your voice to a celebrity, animal, or funny character and let everyone enjoy your TikTok video.

FAQ about Siri Voice on TikTok

Can I Do Siri Voice on TikTok Android?

Please note that Siri’s voice has now been changed to a cheerful valley girl voice because of lawsuit issues. But if you want to use the text-to-speech feature, you can easily do that on your Android phone. The text-to-speech function is available for both Android and iOS devices.

Try It Free Try It Free

TikTok has had numerous trends, and out of all, one trend that is gaining a lot of popularity is the text-to-speech audio effect. For iPhone users, Siri is not new. Siri helps them read text messages and much more, but soon after the text-to-speech feature was added in TikTok, it took the TikTokers world by storm. But since the voice sounded so much like Siri, people started calling it Siri voice rather than text-to-speech. This feature allows users to convert any text into a speech using an automated voice. And if you have never used the text-to-speech feature, this post will help you understand how to do the Siri voice on TikTok.

In this article

01 What is Siri Voice?

02 How to Do Siri Voice on TikTok?

03 TikTok Voice Changer Apps

Part 1: What is Siri Voice?

Siri voice in TikTok is basically an automated voice feature where the voice reads out the text on the video. The feature is called text-to-speech. So, whenever you enable it on your video, the text will be read out loud, which makes the video watching experience fun. Therefore, those who want to add a voice to their TikTok videos can use the text-to-speech feature and let the automated voice do that talking.

You will find almost everyone using it, even those who often use their voice in TikTok videos, and that’s because many TikTok users find it entertaining and funny. Well, no matter why you want to use this feature, find out how to do Siri voice on TikTok without any hassle in the next part!

Part 2: How to Do Siri Voice on TikTok?

To do Siri voice on TikTok, you will have to follow just a few simple steps. Here are the steps that you need to take care of:

Step 1: Launch TikTok on your mobile phone.

Step 2: Start recording a video; else, upload an already recorded video.

Step 3: Tap the Upload button and then click on the checkmark.

Step 4: Now, begin writing something on the screen.

Step 5: Tap on the text you have just written, and you will see the Text-to-Speech option.

Step 6: Click on that and hear the automated voice reading your text. Now, upload the videos, and that’s it. All done!

Part 3: Don’t Like the Siri Voice on TikTok? Try These TikTok Voice Changer Apps

If you are not impressed with the Siri voice on TikTok and would instead like to use some other fun and peppy voice for the text, the good news is there are tons of apps that can help you do that. But before we share the names of the apps, let’s throw some light on why people are looking for such apps. First, if you are using TikTok’s text-to-speech feature in North America, you will hear a computer-automated female voice who will read out the text of the video.

But, when it comes to the UK, the app uses a computer-generated male voice with a rockin’ accent instead of a female voice. However, recently the voiceover artist of the female voice has filed a lawsuit against the company, saying that she never permitted TikTok to use her voice for text-to-speech, which is why TikTok is now using a cheerful valley girl voice for the text-to-speech feature. Unfortunately, TikTok users are not happy with the new voice, making them look for the best TikTok voice generator apps.

If you also want to add another voice for the text-to-speech, here are our hand-picked top and best 5 TikTok voice generator apps for iOS and Android.

1. Voice Changer

Price: Free

Supported OS: Android

Rating: 4.4

Voice Changer is an easy-to-use application and is available for Android users. It lets you change your voice on the go, and the best part is, it offers 40+ voice effects. For example, you can change your voice to helium, robot, zombie, monster, giant, and more! All you need to do is record your voice and start applying the filter; once you are happy with the voice effect, save the recording and share it on TikTok and other social media platforms. The voice filters are unique, and the sharing options are excellent too. The drawback, though, it displays tons of ads, which can be pretty annoying.

2. Celebrity Voice Changer Parody

Price: Free/in-app purchase

OS: iOS

Rating: 4.2

If you want to surprise everyone through your TikTok videos, how about changing the voice to a celebrity’s voice? Well, Celebrity Voice Changer Parody lets you do just that. It has more than 100 celebrity voices, and over 25 million people use the app. It’s the first-ever celebrity voice changer, and it changes the voice using AI technology. The voice modification process is fast and easy, and the plethora of choices you have will leave you impressed. The only drawback is that the free version comes with limited voice effects.

3. Video Voice Changer – Fun Editor

Price: Free/in-app purchase

OS: iOS

Rating: 4.4

If you are looking for an app that will let you change the voice of a pre-recorded video, you may like Video Voice Changer – Fun Editor. With this app, you can change the voice of any video and make it sound like a ghost, bear, mice, and more. The voice effects are entertaining. Moreover, Video Voice Changer – Fun Editor offers you 30+ voice effects. All you need to do is pick a voice effect that you want to use and get going. The app has multiple video recording tools, excellent dubbing features, and rich voice effects. But if you want to unlock all the app’s features, you will have to make in-app purchases.

4. Voice Changer - Audio Effects

Price: Free/in-app purchases

OS: Android

Rating: 4.4

Voice Changer - Audio Effects is an Android app and is available for free. It lets you record your voice in HD quality and later change it to different voices. The interface is easy to understand, and once you add the voice effect, you are ready to share your exciting video with voice with the world. Along with providing you with multiple voice effects, it lets you customize them as well so that you can choose the best sound effect that complements the video. Another feature that you may like is the speed changer effect, making the voice sound hilarious. Along with changing the voice, you can use it to create new ringtones as well. Although it’s free to use, the only drawback is that it contains a lot of ads.

5. VoiceFX - Voice Changer with voice effects

Price: In-app purchase

OS: Android

Rating: 4.3

The last one that you can go for is VoiceFX - Voice Changer with voice effects. This app is available for Android users, and it lets you change your recorded voice to different sounds. Not just your voice, you can even add audio effects to music files as well. Some of the popular audio effects you can try are chipmunk, robot, autotune, mask, drunk, female, sheep, alien, and much more. Using VoiceFX - Voice Changer with voice effects is easy. You can choose an audio effect and record your voice, store the audio as an MP3 file, use this app to change a live playback, and much more. Just one app, but it has many features. Some of the voice effects will come for free, but you will have to make in-app purchases for the top voice effects.

Now you know how to get the Siri voice on TikTok, and if you don’t want to use the built-in voice of the TikTok app, you can always go for TikTok voice generator apps, which will offer multiple voices to choose from. So, change your voice to a celebrity, animal, or funny character and let everyone enjoy your TikTok video.

FAQ about Siri Voice on TikTok

Can I Do Siri Voice on TikTok Android?

Please note that Siri’s voice has now been changed to a cheerful valley girl voice because of lawsuit issues. But if you want to use the text-to-speech feature, you can easily do that on your Android phone. The text-to-speech function is available for both Android and iOS devices.

Try It Free Try It Free

TikTok has had numerous trends, and out of all, one trend that is gaining a lot of popularity is the text-to-speech audio effect. For iPhone users, Siri is not new. Siri helps them read text messages and much more, but soon after the text-to-speech feature was added in TikTok, it took the TikTokers world by storm. But since the voice sounded so much like Siri, people started calling it Siri voice rather than text-to-speech. This feature allows users to convert any text into a speech using an automated voice. And if you have never used the text-to-speech feature, this post will help you understand how to do the Siri voice on TikTok.

In this article

01 What is Siri Voice?

02 How to Do Siri Voice on TikTok?

03 TikTok Voice Changer Apps

Part 1: What is Siri Voice?

Siri voice in TikTok is basically an automated voice feature where the voice reads out the text on the video. The feature is called text-to-speech. So, whenever you enable it on your video, the text will be read out loud, which makes the video watching experience fun. Therefore, those who want to add a voice to their TikTok videos can use the text-to-speech feature and let the automated voice do that talking.

You will find almost everyone using it, even those who often use their voice in TikTok videos, and that’s because many TikTok users find it entertaining and funny. Well, no matter why you want to use this feature, find out how to do Siri voice on TikTok without any hassle in the next part!

Part 2: How to Do Siri Voice on TikTok?

To do Siri voice on TikTok, you will have to follow just a few simple steps. Here are the steps that you need to take care of:

Step 1: Launch TikTok on your mobile phone.

Step 2: Start recording a video; else, upload an already recorded video.

Step 3: Tap the Upload button and then click on the checkmark.

Step 4: Now, begin writing something on the screen.

Step 5: Tap on the text you have just written, and you will see the Text-to-Speech option.

Step 6: Click on that and hear the automated voice reading your text. Now, upload the videos, and that’s it. All done!

Part 3: Don’t Like the Siri Voice on TikTok? Try These TikTok Voice Changer Apps

If you are not impressed with the Siri voice on TikTok and would instead like to use some other fun and peppy voice for the text, the good news is there are tons of apps that can help you do that. But before we share the names of the apps, let’s throw some light on why people are looking for such apps. First, if you are using TikTok’s text-to-speech feature in North America, you will hear a computer-automated female voice who will read out the text of the video.

But, when it comes to the UK, the app uses a computer-generated male voice with a rockin’ accent instead of a female voice. However, recently the voiceover artist of the female voice has filed a lawsuit against the company, saying that she never permitted TikTok to use her voice for text-to-speech, which is why TikTok is now using a cheerful valley girl voice for the text-to-speech feature. Unfortunately, TikTok users are not happy with the new voice, making them look for the best TikTok voice generator apps.

If you also want to add another voice for the text-to-speech, here are our hand-picked top and best 5 TikTok voice generator apps for iOS and Android.

1. Voice Changer

Price: Free

Supported OS: Android

Rating: 4.4

Voice Changer is an easy-to-use application and is available for Android users. It lets you change your voice on the go, and the best part is, it offers 40+ voice effects. For example, you can change your voice to helium, robot, zombie, monster, giant, and more! All you need to do is record your voice and start applying the filter; once you are happy with the voice effect, save the recording and share it on TikTok and other social media platforms. The voice filters are unique, and the sharing options are excellent too. The drawback, though, it displays tons of ads, which can be pretty annoying.

2. Celebrity Voice Changer Parody

Price: Free/in-app purchase

OS: iOS

Rating: 4.2

If you want to surprise everyone through your TikTok videos, how about changing the voice to a celebrity’s voice? Well, Celebrity Voice Changer Parody lets you do just that. It has more than 100 celebrity voices, and over 25 million people use the app. It’s the first-ever celebrity voice changer, and it changes the voice using AI technology. The voice modification process is fast and easy, and the plethora of choices you have will leave you impressed. The only drawback is that the free version comes with limited voice effects.

3. Video Voice Changer – Fun Editor

Price: Free/in-app purchase

OS: iOS

Rating: 4.4

If you are looking for an app that will let you change the voice of a pre-recorded video, you may like Video Voice Changer – Fun Editor. With this app, you can change the voice of any video and make it sound like a ghost, bear, mice, and more. The voice effects are entertaining. Moreover, Video Voice Changer – Fun Editor offers you 30+ voice effects. All you need to do is pick a voice effect that you want to use and get going. The app has multiple video recording tools, excellent dubbing features, and rich voice effects. But if you want to unlock all the app’s features, you will have to make in-app purchases.

4. Voice Changer - Audio Effects

Price: Free/in-app purchases

OS: Android

Rating: 4.4

Voice Changer - Audio Effects is an Android app and is available for free. It lets you record your voice in HD quality and later change it to different voices. The interface is easy to understand, and once you add the voice effect, you are ready to share your exciting video with voice with the world. Along with providing you with multiple voice effects, it lets you customize them as well so that you can choose the best sound effect that complements the video. Another feature that you may like is the speed changer effect, making the voice sound hilarious. Along with changing the voice, you can use it to create new ringtones as well. Although it’s free to use, the only drawback is that it contains a lot of ads.

5. VoiceFX - Voice Changer with voice effects

Price: In-app purchase

OS: Android

Rating: 4.3

The last one that you can go for is VoiceFX - Voice Changer with voice effects. This app is available for Android users, and it lets you change your recorded voice to different sounds. Not just your voice, you can even add audio effects to music files as well. Some of the popular audio effects you can try are chipmunk, robot, autotune, mask, drunk, female, sheep, alien, and much more. Using VoiceFX - Voice Changer with voice effects is easy. You can choose an audio effect and record your voice, store the audio as an MP3 file, use this app to change a live playback, and much more. Just one app, but it has many features. Some of the voice effects will come for free, but you will have to make in-app purchases for the top voice effects.

Now you know how to get the Siri voice on TikTok, and if you don’t want to use the built-in voice of the TikTok app, you can always go for TikTok voice generator apps, which will offer multiple voices to choose from. So, change your voice to a celebrity, animal, or funny character and let everyone enjoy your TikTok video.

FAQ about Siri Voice on TikTok

Can I Do Siri Voice on TikTok Android?

Please note that Siri’s voice has now been changed to a cheerful valley girl voice because of lawsuit issues. But if you want to use the text-to-speech feature, you can easily do that on your Android phone. The text-to-speech function is available for both Android and iOS devices.

Try It Free Try It Free

TikTok has had numerous trends, and out of all, one trend that is gaining a lot of popularity is the text-to-speech audio effect. For iPhone users, Siri is not new. Siri helps them read text messages and much more, but soon after the text-to-speech feature was added in TikTok, it took the TikTokers world by storm. But since the voice sounded so much like Siri, people started calling it Siri voice rather than text-to-speech. This feature allows users to convert any text into a speech using an automated voice. And if you have never used the text-to-speech feature, this post will help you understand how to do the Siri voice on TikTok.

In this article

01 What is Siri Voice?

02 How to Do Siri Voice on TikTok?

03 TikTok Voice Changer Apps

Part 1: What is Siri Voice?

Siri voice in TikTok is basically an automated voice feature where the voice reads out the text on the video. The feature is called text-to-speech. So, whenever you enable it on your video, the text will be read out loud, which makes the video watching experience fun. Therefore, those who want to add a voice to their TikTok videos can use the text-to-speech feature and let the automated voice do that talking.

You will find almost everyone using it, even those who often use their voice in TikTok videos, and that’s because many TikTok users find it entertaining and funny. Well, no matter why you want to use this feature, find out how to do Siri voice on TikTok without any hassle in the next part!

Part 2: How to Do Siri Voice on TikTok?

To do Siri voice on TikTok, you will have to follow just a few simple steps. Here are the steps that you need to take care of:

Step 1: Launch TikTok on your mobile phone.

Step 2: Start recording a video; else, upload an already recorded video.

Step 3: Tap the Upload button and then click on the checkmark.

Step 4: Now, begin writing something on the screen.

Step 5: Tap on the text you have just written, and you will see the Text-to-Speech option.

Step 6: Click on that and hear the automated voice reading your text. Now, upload the videos, and that’s it. All done!

Part 3: Don’t Like the Siri Voice on TikTok? Try These TikTok Voice Changer Apps

If you are not impressed with the Siri voice on TikTok and would instead like to use some other fun and peppy voice for the text, the good news is there are tons of apps that can help you do that. But before we share the names of the apps, let’s throw some light on why people are looking for such apps. First, if you are using TikTok’s text-to-speech feature in North America, you will hear a computer-automated female voice who will read out the text of the video.

But, when it comes to the UK, the app uses a computer-generated male voice with a rockin’ accent instead of a female voice. However, recently the voiceover artist of the female voice has filed a lawsuit against the company, saying that she never permitted TikTok to use her voice for text-to-speech, which is why TikTok is now using a cheerful valley girl voice for the text-to-speech feature. Unfortunately, TikTok users are not happy with the new voice, making them look for the best TikTok voice generator apps.

If you also want to add another voice for the text-to-speech, here are our hand-picked top and best 5 TikTok voice generator apps for iOS and Android.

1. Voice Changer

Price: Free

Supported OS: Android

Rating: 4.4

Voice Changer is an easy-to-use application and is available for Android users. It lets you change your voice on the go, and the best part is, it offers 40+ voice effects. For example, you can change your voice to helium, robot, zombie, monster, giant, and more! All you need to do is record your voice and start applying the filter; once you are happy with the voice effect, save the recording and share it on TikTok and other social media platforms. The voice filters are unique, and the sharing options are excellent too. The drawback, though, it displays tons of ads, which can be pretty annoying.

2. Celebrity Voice Changer Parody

Price: Free/in-app purchase

OS: iOS

Rating: 4.2

If you want to surprise everyone through your TikTok videos, how about changing the voice to a celebrity’s voice? Well, Celebrity Voice Changer Parody lets you do just that. It has more than 100 celebrity voices, and over 25 million people use the app. It’s the first-ever celebrity voice changer, and it changes the voice using AI technology. The voice modification process is fast and easy, and the plethora of choices you have will leave you impressed. The only drawback is that the free version comes with limited voice effects.

3. Video Voice Changer – Fun Editor

Price: Free/in-app purchase

OS: iOS

Rating: 4.4

If you are looking for an app that will let you change the voice of a pre-recorded video, you may like Video Voice Changer – Fun Editor. With this app, you can change the voice of any video and make it sound like a ghost, bear, mice, and more. The voice effects are entertaining. Moreover, Video Voice Changer – Fun Editor offers you 30+ voice effects. All you need to do is pick a voice effect that you want to use and get going. The app has multiple video recording tools, excellent dubbing features, and rich voice effects. But if you want to unlock all the app’s features, you will have to make in-app purchases.

4. Voice Changer - Audio Effects

Price: Free/in-app purchases

OS: Android

Rating: 4.4

Voice Changer - Audio Effects is an Android app and is available for free. It lets you record your voice in HD quality and later change it to different voices. The interface is easy to understand, and once you add the voice effect, you are ready to share your exciting video with voice with the world. Along with providing you with multiple voice effects, it lets you customize them as well so that you can choose the best sound effect that complements the video. Another feature that you may like is the speed changer effect, making the voice sound hilarious. Along with changing the voice, you can use it to create new ringtones as well. Although it’s free to use, the only drawback is that it contains a lot of ads.

5. VoiceFX - Voice Changer with voice effects

Price: In-app purchase

OS: Android

Rating: 4.3

The last one that you can go for is VoiceFX - Voice Changer with voice effects. This app is available for Android users, and it lets you change your recorded voice to different sounds. Not just your voice, you can even add audio effects to music files as well. Some of the popular audio effects you can try are chipmunk, robot, autotune, mask, drunk, female, sheep, alien, and much more. Using VoiceFX - Voice Changer with voice effects is easy. You can choose an audio effect and record your voice, store the audio as an MP3 file, use this app to change a live playback, and much more. Just one app, but it has many features. Some of the voice effects will come for free, but you will have to make in-app purchases for the top voice effects.

Now you know how to get the Siri voice on TikTok, and if you don’t want to use the built-in voice of the TikTok app, you can always go for TikTok voice generator apps, which will offer multiple voices to choose from. So, change your voice to a celebrity, animal, or funny character and let everyone enjoy your TikTok video.

FAQ about Siri Voice on TikTok

Can I Do Siri Voice on TikTok Android?

Please note that Siri’s voice has now been changed to a cheerful valley girl voice because of lawsuit issues. But if you want to use the text-to-speech feature, you can easily do that on your Android phone. The text-to-speech function is available for both Android and iOS devices.

Also read: